Sony CDX-M850MP Manual De Instrucciones página 19

Ocultar thumbs Ver también para CDX-M850MP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during CD (MD) playback*
– Change albums*
4
.
*1 Only if the corresponding optional equipment is
connected.
*2 Available only when an optional Sony portable
device is connected to AUX IN terminal of the unit.
You cannot connect any optional CD/MD units at
the same time.
*3 If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
*4 Available only when an MP3 file is played.
When an MP3 file is played, you can select an
album using the rotary commander.
(With this unit)
To
Do this
Skip albums
Push in and rotate [once for
– Album selection
each album] the control.
To continuously skip
albums, push in and rotate
(and hold) the control.
SEEK/AMS
control
PRESET/DISC
control
1
.
(With optional unit)
To
Do this
Skip discs
Push in and rotate [once for
– Disc selection
each disc] the control.
To continuously skip discs,
push in and rotate once and
rotate again within about 1
second (and hold) the
control.
Skip albums
Push in and rotate the
– Album selection
control [hold for a moment]
and release.
To continuously skip
albums, push in and rotate
again (and hold) within
about 1 second of first
releasing the control.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido