Honeywell RTH8500 Wi-Fi Serie Guia Del Usuario página 15

Ocultar thumbs Ver también para RTH8500 Wi-Fi Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing your thermostat
Important!
The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire
brings 24 VAC power to the thermostat. Many older mechanical or battery operated
thermostats do not require a C wire. If you don't have a C wire, try:
• Looking for an unused wire that is pushed into the wall. Connect that wire to C and
check that it is connected to the 24 VAC common at your heating/cooling system.
Check the video section at wifithermostat.com
Note:
Not all heating/cooling systems label the 24 VAC common C. Check your system
manual or contact the manufacturer to find out which terminal is the 24 VAC common.
View the Alternate Wiring videos at wifithermostat.com/videos
Wiring
conventional
For
conditioner), see page 14. See "Glossary" on page 68 for further definition.
heat pump
For a
definition.
heating/cooling systems (natural gas, oil or electric furnace, air
system, see page 15. See "Glossary" on page 68 for further
13
69-2715ES—07

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido