Introduction; Description; Structure - Urmet 1083/39 Manual De Instrucciones

1.

INTRODUCTION

The device may be used:
1. To make panels with buttons only.
– See the information in this booklet for basic programming of the device without WiFi connection.
– See § 8 of the booklet for advanced programming of the device with WiFi connection.
2. Paired with display module Ref. 1168/1.
– To confi gure the device implemented in 2VOICE systems, download the relevant instrument booklets
from the Urmet website by scanning the following QR Code with the camera of your smartphone or
tablet.
http://qrcode.urmet.com/default.aspx?prodUrmet=142071&lingua=en
2.

DESCRIPTION

The audio door phone unit Ref. 1083/39 is dedicated to the 2VOICE system. It has a one-module mod. 1168
mechanical structure and is provided with:
• Two calling buttons;
• System state indication (DDA);
• Input for coaxial cable from CCTV camera or output from surveillance camera device (Ref. 1083/69) in
case of multiple cameras (max. 4);
• Connector for managing the device for surveillance cameras.

3. STRUCTURE

1. DDA LED (see § 10);
The LEDs identify the selected parameter type during confi guration.
2. "USER 0" calling button;
3. Speaker;
4. Name tag and button light LED;
The LEDs identify the selected parameter value during confi guration.
5. "USER 1" calling button;
The button can be used for changing and/or confi rming the parameter during confi guration.
6. Microphone;
7. Dusk sensor for automatically switching on the name tag lighting.
DS1083-118A
FRONT VIEW
1 2 3 4 5 6 7
11