Default Configuration; How To Reset Default Settings; Advanced Configuration (With Wifi Configuration); Speaker Volume Adjustment - Urmet 1083/39 Manual De Instrucciones

Ocultar thumbs Ver también para 1083/39:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26

6.5. DEFAULT CONFIGURATION

Parameter
Function
Parameter 1
Door unit type
Parameter 2
Door unit ID
Parameter 3
Door opener
Parameter 4
Call button enabling
Parameter 5
Call button association with switchboard call
The "Number of external cameras" parameter is set by default to 1. To change parameter
confi guration, see para. 8 "ADVANCED CONFIGURATION (WITH WIFI CONNECTION)".
7.

HOW TO RESET DEFAULT SETTINGS

Press the PROGRAM button (8) briefl y to go to confi guration state. The LEDs (1) will blink during this step.
Then hold the BUTTON (5) pressed for longer than 10 seconds.
The door unit will generate two 2-second long beeps and all parameters will be reset before exiting
confi guration state.
8.

ADVANCED CONFIGURATION (WITH WiFi CONFIGURATION)

Prepare the device as WiFi access point for advanced confi guration of the audio door unit Ref. 1083/39.
To start this type of confi guration, follow the instructions in the booklet which can be downloaded from the
Urmet website by scanning the QR Code shown below with the camera of your smartphone or tablet.
Voice alerts are possible if the audio door unit module ref. 1083/39 is connected to an ILA module ref.
1168/48.
http://qrcode.urmet.com/default.aspx? prodUrmet=144286&lingua=en
9.

SPEAKER VOLUME ADJUSTMENT

Volumes are calibrated by default so not to require adjustments in most cases.
Use a screwdriver to adjust the speaker volume (10), if required.
10. DDA (DISABILITY DISCRIMINATION ACT) LED ACTUATION
- SYSTEM STATUS INDICATION
The system state is shown by the following indications which appear on the door unit front:
a) call in progress: LED
b) line engaged: LED
c) off-hook waiting time expired: voice message "THE USER IS NOT ANSWERING";
d) conversion in progress: LED
e) door open: LED
The voice messages are possible if the audio door unit Ref. 1083/39 is connected to the ILA
module Ref. 1168/48.
DS1083-118A
on green and voice message "CALL IN PROGRESS"
on red and voice message "THE LINE IS BUSY"
on orange;
green and "THE DOOR IS OPEN" voice message.
Default
Main
Address 0
Privacy
Both buttons enabled
Not active
15

Publicidad

Tabla de contenido
loading

Tabla de contenido