Worx HYDROSHOT WG630 Manual Del Usario página 14

3. Turbo nozzle (WA4037, sold separately)
The turbo nozzle delivers 360° of rotating water,
which cleans a larger area than the 0° water
pattern during the same time period. Suitable
with the pressure cleaning lance installed on the
HYDROSHOT . Recommend to use it with high
TM
pressure setting. (See Fig. L)
4. Window squeegee with water sprayer
(WA4050, sold separately)
The window squeegees quick connection easily
snaps into the tool to spray water or wipe off water
of glass or tiled surfaces.
Directly connect to tool or extension lance (WA4012 -
sold separately). (See Fig. M1, M2, M3, M4)
Not for use with the included pressure cleaning
lance.
5. Bottle cap connector (WA4038)
The bottle cap connector accessory allows the tool
to directly connect with most 2 Liter bottles with
approximately 1" openings. (NOTE: May not fit all
consumable soda and water bottles) (See Fig. N1,
N2, N3)
WARNING: Do not install the bottle cap
connector accessory until it is ready to be used.
The accessories vents will leak liquid, if a bottle is
installed, with the machine lying on a surface.
6. Pivoting Quick-Connect Adapter (WA4039,
sold separately)
The Pivoting Quick Connect Adapter allows power
14
cleaning tips to be fully adjusted up to 180° in any
direction. Ideal for cleaning around hard-to-reach
areas.
Directly connect to pressure cleaning lance and
multi-spray nozzle. (See Fig. P1, P2)
7. Rotary Cleaning Brush (WA4042, sold
separately)
The rotary cleaning brush accessory easily snaps
into the tool for cleaning sensitive surfaces in, and
around, tight spaces.
Directly connect to tool or extension lance (WA4012 -
sold separately). (See Fig. Q)
Not for use with the included pressure cleaning
lance.
8. Auto/Boat Power Scrubber (WA1820, sold
separately)
The water-powered, soft-bristle rotary scrubber easily
snaps into the tool for cleaning delicate surfaces.
Directly connect to tool or extension lance (WA4012 -
sold separately). (See Fig. R, S)
Not for use with the included pressure cleaning
lance.
9. Hard Surface Power Scrubber (WA1821,
sold separately)
The water-powered, hard-bristle rotary scrubber
easily snaps into the tool for cleaning hard surfaces.
Directly connect to tool or extension lance (WA4012 -
sold separately). (See Fig. R, S)
Cordless Portable Power Cleaner
Not for use with the included pressure cleaning
lance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
damaged or worn parts. Contact your supplier or the
manufacturer for replacement parts.
Hose filter maintenance
Remove the hose filter from the hose and get out
the strainer. Rinse the parts with clean water before
reassembling. (See Fig. O1, O2)
Filter screen maintenance
Remove the hose adapter to get the filter screen.
(See Fig. T1, T2) Rinse it with clean water before
reassembling.
NOTE: When retightening the hose adapter, please
tighten securely. Otherwise, it may not draw any
water for proper operation.
WARNING: Any other servicing should be
performed by an authorized service
representative.
CLEANING/STORAGE
Before Storage, completely drain all the water from
the machine and hose.
Clean the molded plastic housing of the machine
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Store in a secure and dry place
out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost-free
place.
EN