Dimplex DWF3651 Manual Del Propietário página 10

Fireplace Installation
inserted back into the bottom
of the unit, into the cord stor-
age area.
Support Feet Installation
Instructions
1. Remove unit from packaging
and place open side up on a
flat working surface.
2. Secure the two support feet
to the bottom of the unit using
the supplied screws.
3. Turn the unit upright.
4. Attach the provided cover
plates over the two hanging
bracket openings on the back
of the unit, with the provided
screws (Figure 8).
5. Carefully pour and evenly dis-
tribute the supplied glass rock
media in the Media tray of the
firebox (Figure 6).
6. Hang the front glass assembly
on the mounts of the firebox
and secure the glass onto the
unit by installing the retaining
screws (Figure 7)
7. Excess electrical cord can be
inserted back into the bottom
of the unit, into the cord stor-
age area.
10
Figure 6
Front Glass
Assembly
Figure 7
Figure 8
Media Tray
Glass Retaining
Screw
Cover Plates
www.dimplex.com