Gewiss Chorus GW 10 701 Manual De Instrucciones página 36

OPERATING INSTRUCTIONS
Parameter setting
Setting Set Point T1
When symbol
to blink. Regulate the value of T1 with keys
Press key
value.
Setting Set Point T2
When symbol
to blink. Regulate the value of T2 with keys
Press key
value.
Setting Set Point T3
When symbol
to blink. Regulate the value of T3 with keys
Press key
value.
Setting the antifreeze/high temperature protection
temperature value
The temperature value starts to blink.
Depending on the type of operation (heating/air condi-
tioning), the antifreeze/high temperature protection tem-
perature value can be adjusted using the
Press the key
set.
There are the following constraints for the set point val-
ues: Heating: T antifreeze < T1 < T2 < T3 –
Air conditioning: T1 < T2 < T3 < T high temperature
appears, the temperature value starts
within 30 seconds to confirm the set
appears, the temperature value starts
within 30 seconds to confirm the set
, appears, the temperature value starts
within 30 seconds to confirm the set
within 30 seconds to confirm the value
36
.
.
.
keys.