Steren RM-100 Manual De Instrucciones página 19

B. Steadily manual search models
1. Turn on the power of the
household electrical
you want to control manually (such
as TV, VCR and etc.); point the
remote controller at the receiving
window of your household electrical
appliances.
3. Press the
repeatedly until the volume symbol
of the household appliance under
remote control appears.
Note: during search, it exits from the search status if there is no key pressed
within 5 seconds.
appliances
"volume+" key
2. Hold down the "Device" key you
want to search and release it
after the operation indicator
blinks; now it is entering the
search mode.
Note: After entering the search
mode, the operation indicator should
blink at first and then keep on.
4. At this point, check the function
keys (other than Volume+, Volune-,
SET and Device keys) on the remote
controller for operation, if they are
operational, press the Device key
and complete the setting, if not,
repeat the step 2 - 4.
19