You can make lighting and color adjustments before taking
a picture by using the scroll key to scroll through the active
toolbar. See "Setup settings—Adjust color and lighting,"
p. 21.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
To free memory before taking a picture, select
Go to free memory
up images or video clips). See "Free memory," p. 28.
To activate the front camera, select
Use secondary
camera.
To close the main camera, close the slide.
Still image camera indicators
The still image camera viewfinder displays the following:
• The current capture mode indicator (1).
• The active toolbar (2), which you can scroll through
before capturing the image to activate the self-timer
or sequence mode, or select the capturing mode, scene,
flash mode, white balance, exposure compensation,
color tone, and light sensitivity (the active toolbar
is not displayed during focus and image capture).
See "Active toolbar," p. 19.
18
Options
(only available if you have backed
Options
>
• The image
resolution
indicator (3)
indicates
whether the
quality of the
image is
Print
>
3M - Large
(2048x1536
resolution),
Print
2M - Medium
(1600x1200 resolution),
0.8M - Small
(1280x960 resolution), or
message 0.3M
(640x480 resolution).
• The image counter (4) displays the estimated number of
images you can capture using the current image quality
setting and memory in use (the counter is not displayed
during focus and image capture).
• The device memory (
indicators (5) show where images are saved.
To display all viewfinder indicators, select
icons. To display only the camera status indicators, select
Hide
icons.
Print/e-mail
Multimedia
) and memory card (
)
Options
>
Show