Setting The Time; Setting The Date; Using The Chronograph - MIYOTA 0S20 Manual Del Usuario

4. INSTRUCTION MANUAL
A) DISPLAYS AND BUTTONS
Chronograph
second hand
Hour
hand
Chronograph
minute hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd-click position so that the second hand stops at (0) position.
2. Turn the crown to set the hour and minute hands.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown to left to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
not change on the following day.
3. After the date has been set, push the crown back to the normanl position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to
maximum of 59min 59sec.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and all hands return to their 0 positions.
Chronograph
second hand
Hour
hand
Chronograph
minute hand
RESET
second hand
second hand
"A" TIME MEASUREMENT
Button A
minute hand
24-hour hand
Normal crown
position
Button B
Calendar
Button A
minute hand
24-hour hand
Normal crown
position
Button B
Calendar
"B"
STOP
"A"
"B"