Using The Chronograph - MIYOTA 0S00 Manual De Instrucciones

E) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maximum of 11 hours 59 minut
59 seconds.
The chronograph second hand keeps continuously for 11 hours 59 minutes 59 seconds after starting.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and the chronograph second hand, chronograph minute hand, an
chronograph hour hand return to zero position.
F) CHRONOGRAPH RESET(INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not return to zero position after th
chronograph has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph second hand to zero position. The chronograph hand can be advance
by continuously pressing button "A".
* The chronograph hour and minutes hands are syncronized with chronograph second hand.
* The chronograph second hand can be advanced one scale by pressing button "A" once.
* The chronograph second hand can be advanced rapidly by continuously pressing button "A".
3. Once the hand have been reset to zero position, push the crown back to the normal position.
* Do not return crown to normal position while chronograph second hand returns to 12:00 (ZERO) position.
Hand stops on the way when crown is returned to normal position and these positions are recognized
as 12:00 (ZERO) position.
"A"
These specifications might be changed without prior notice.
"A"
"B"
"A"
"B"