Hansgrohe Solaris E 06665 Serie Instrucciones De Montaje página 10

5
6a
6c
10
6b
English
Lubricate the diverter o-rings using white plumbers
grease.
Press the diverter assembly firmly into the spout
tee until it is fully seated.
Firmly press the spout over the diverter.
Tighten the screw using a 3 mm Allen wrench.
Do not overtighten the screw.
Overtightening the screw will
deform the o-rings, causing a leak.
Tango C:
Install the diverter rod.
Swing C:
Install the diverter knob.
Limbo C:
Install the diverter knob.