Machine Information; Technical Specifications - VONROC CS501DC Traducción Del Manual Original

• Only use saw blades that match the specifica­
tions given in this operating manual and that
have been tested and marked in accordance
with EN 847­1.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat­
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e) The battery can be damaged by pointed objects
such as nails or screwdrivers or by force
applied externally. An internal short circuit can
occur and the battery can burn, smoke, explode
or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type recharge-
able Battery packs with the charger. Other types
of batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe­
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non­rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!

2. MACHINE INFORMATION

Intended use
This cordless circular saw is intended for length-
wise, crosswise and bevel cutting in wood while
keeping the baseplate resting firmly on the work-
piece. Sawing plastics or metals is not permitted.
The power tool with the fitted sawblade is designed
with sufficient capacity for sawing hardwood and
softwood as well as chipboard and fibreboard. The
WWW.VONROC.COM
sawblade is not designed for cutting firewood. Do
not use the saw to cut materials other than those
specified described in manual.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
CS501DC
-
S_CS501DC
CD801AA
S2_CS501DC
2 x CD801AA
S3_CS501DC
CD803AA
Machine information
Voltage
No load speed
Saw blade size
Sawing capacity 0°
Sawing capacity 45°
Weight
Sound pressure level L
PA
Sound power level L
WA
Vibration
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
EN
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
4000 /min
Ø150×Ø16×1.6mm
48mm
36mm
2.1 kg
75.3 dB(A), K=3dB(A)
86.3 dB(A), K=3dB(A)
3.015 m/s K=1.5 m/s
2 2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
9