Main Power Switch - Makita XBU02 Manual De Instrucciones

Press the check button on the battery cartridge to indi-
light up for a few seconds.
Indicator lamps
Lighted Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.

Main power switch

ton until the power lamp and speed indicator go off.
2
1. 2. Main power button 3. Power
lamp
NOTE:
without any operations for a certain period of time.
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
may have
malfunctioned.
-
1
3
Switch action
WARNING:
For your safety, this tool is
equipped with lock-off lever which prevents the
tool from unintended starting. NEVER use the tool
if it runs when you simply pull the switch trigger
without pressing the lock-off lever. Return the
tool to our authorized service center for proper
repairs BEFORE further usage.
WARNING:
NEVER tape down or defeat pur-
pose and function of lock-off lever.
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released. Operating a tool
with a switch that does not actuate properly can lead
CAUTION:
power button and switch trigger when carrying
the tool.
NOTICE:
Do not pull the switch trigger hard with-
out pressing the lock-off lever. This can cause
switch breakage.
depress the lock-off lever and pull the switch trigger.
switch trigger. Release the switch trigger to stop.
2
1. Lock-off lever 2.
9 ENGLISH
1