When Calling; Initializing The Unit - Sony DR-BT100CX Manual De Instrucciones

unit.
connected
ction to
stribution
t Profile) is
y during
unit may
o improper
ting for the
Bluetooth
t in which
connection
device. While
and hold
o lower the
2
. *
lue which
sion volume
he bit rate, in
y the sound
eive high bit
pping may
usage
ompleted,
es once. The
t reduce the
n the usage
the original
 again
indicator

When calling

The recipient's voice cannot be
heard.
 Check that both this unit and the
Bluetooth mobile phone are turned on.
 Check the connection between this unit
and the Bluetooth mobile phone. Make a
Bluetooth connection (HFP or HSP)
again (page 17).
 Check that output of the Bluetooth
mobile phone is set for this unit.
 Check that the volume of the unit is not
set too low.
 Turn up the volume on the connected
Bluetooth mobile phone if necessary.
 If you are listening to music using this
unit, stop playback, press the multi
function button and talk.
Low sound from recipient
 Turn up the volume of this unit.
 Turn up the volume on the connected
Bluetooth mobile phone if necessary.

Initializing the unit

You can reset this unit to its default
(such as volume setting) and delete all
pairing information.
1
If this unit is turned on, press
and hold the POWER button for
about 2 seconds to turn off this
unit.
2
Press and hold the POWER
button and multi function
button together for about 7
seconds.
The indicator (blue) flashes four
times, and this unit is reset to the
default setting. All pairing
information is deleted.
DR-BT100CX_4-130-037-51(1)
25
US