Safety Instructions; General Power Tool Safety Warnings - VONROC MS503AC Traducción Del Manual Original

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to follow
the safety warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the safe-
ty warnings and the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Keep bystanders away.
Wear a dust protection.
Wear ear and eye protection.
Attention: Laser radiation. Do not stare into
the beam Class 2 laser.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries.
Danger area! Keep hands, fingers or arms
away from this area.
Transport the machine only when the
machine is in inward transport position.
Class II machine - Double insulation -
You don't need any earthed plug.
The product is in accordance with the
applicable safety standards in the European
directives.
The adjustable fence must be
1 2 3
pulled outward when sawing
mitre/bevel angles.
WWW.VONROC.COM
Take note of the dimensions of
Ømax.
the saw blade. The hole
216mm
diameter must fit the tool
Ø30mm
spindle without play. If it is
necessary to use reducers,
ensure that the dimensions of
the reducer are suitable for the
base blade thickness and the
saw blade hole diameter, as well
as the tool spindle diameter.
Wherever possible, use the
reducers provided with the saw
blade. The saw blade diameter
must match the information
specified on the symbol.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or batte-
ry-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flamma-
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
EN
7