Troubleshooting - Foster 7323/945 Manual De Instalacion Y Uso

troubleshooting

Problem
You cannot activate or operate
the appliance.
The hob deactivates.
Residual heat indicator does not
come on.
Automatic Warm Up function
does not operate.
The heat setting
between two levels.
The sensor keys become hot.
a 4
comes on.
comes on.
4
comes on.
Possible cause
The appliance
connected to an electrical
supply or it is connected
incorrectly.
The fuse is released.
it's been more than 10
seconds from the switching
on of the appliance.
You touched 2 or more
sensor keys at the same
time.
Pause function operates.
There is water or fat stains
on the control panel.
You put something on the
sensor key ON-OFF.
The zone is not hot because
it operated only for a short
time.
The zone is hot.
The highest heat setting is
set.
changes Power
function operates.
The cookware is too large
or you put it too near to the
controls.
Automatic
operates.
The Child Lock function
operates.
Water or cooking utensils
above the control panel.
Remedy
is not Check if the appliance is correctly
connected to the electrical supply.
Refer to
chapter.
Make sure that the fuse is the cause
of the malfunction.
If the fuse releases again and again,
contact a qualified electrician.
Activate the appliance again and
set the heat setting in less than 10
seconds.
Touch only one sensor key.
Refer to
chapter.
Clean the control panel.
Remove the object from the sensor
key.
If the zone operated sufficiently
long to be hot contact an Authorised
Service Centre.
Let the zone become sufficiently
cool.
The highest heat setting has the
same power as the function.
management Refer to "Using
chapter.
Put large cookware on the rear
zones if possible.
Switch Off Deactivate
activate it again.
Refer to "Using
chapter.
Remove the objects from the control
panel.
"electrical connection"
"Using the cooktop"
the cooktop"
the appliance and
the cooktop"
17