Husqvarna R 214T Manual De Usuario página 4

Ocultar thumbs Ver también para R 214T:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical system overview
1. Battery
2. Main fuse
3. Operator presence control (OPC)
4. Micro switch, parking brake
5. Safety switch for the lift lever
6. Ignition lock
Husqvarna Connect
The operators manual and more information about the
product is available at Husqvarna Connect App.
Husqvarna Connect is a free App for your mobile device.
Refer to
Husqvarna Connect on page 12 .
Operator Presence Control (OPC)
The OPC engages when the operator lifts from the seat.
The engine and the drive to the blades stop if the blades
are engaged or the parking brake is not applied. Refer to
Start conditions on page 8 .
Hour meter
The hour meter shows how many hours the engine has
run. The time with ignition on but engine off is not
registered. The last digit shows tenths of an hour (6
minutes).
4
7
6
5
1
2
Forward and rearward pedals
The speed is gradually adjusted with 2 pedals. The left
pedal (A) is used to move forward, and the right pedal
(B) is used to move rearward. The product stops when
the pedals are released.
Cutting deck
The cutting decks for this product are Combi cutting
decks with BioClip. BioClip cuts the grass into fertilizer.
The Combi cutting decks can also be used without
BioClip. Without BioClip the grass is ejected to the rear.
3
4
A
B
1686 - 001 - 03.11.2021

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 214tcR 214tc comfort editionR 216t awd

Tabla de contenido