Blaupunkt 5B50P8590 Instrucciones De Uso página 49

Fast preheat
You can shorten the preheating time by using the Fast Preheat function. Select a function, and tap
the symbol for Fast Preheat
Preheat is not available for the selected function, a beep will be heard. Fast Preheat is not available
with the "Defrost" and "Dough process" functions.
Set end time
You can set the time at which the cooking process is to be ended here.
1. Tap . Move the Smart Slider or tap the "+/-" symbol to set the end time in hours. Tap
again to set the end time in minutes. When you have finished setting, tap
setting.
2. If you set the end time, you must also set the cooking time. For information on how to set the
cooking time, refer to the section "Cooking with the oven".
3. For example, if you set the end time to 10 o'clock and the cooking time to 1 hour, the oven will
heat up at 9 o'clock and be ready at 10 o'clock.
Changes while cooking
When the appliance is switched on, you can change the operating mode and temperature using the
oven function control or the Smart Slider. If no further action is taken after the change for 6
seconds, the oven will accept the change.
If you want to change the cooking time while cooking, tap on
Slider or the "+/-" symbol. If no further action is taken after the change for 6 seconds, the oven will
accept the change. You cannot make any changes during a cooking process with a specified end
time.
If you want to cancel the cooking process, tap
Notes
Changing the operating modes/temperature/remaining cooking time can have a number of negative
effects on the cooking result. We recommend that you avoid doing this – unless you are an
experienced cook.
Caution!
After switching on the appliance, it will become very hot, especially inside. Never touch the inner
surfaces of the appliance or the heating elements. Use oven gloves to remove accessories or
ovenware from the cooking chamber and let the appliance cool down. Keep children at a safe
distance to avoid burns.
. The symbol for Fast Preheat will light up on the display. If Fast
.
11
to save the
and change it using the Smart