Pull-out system
Notes
1.
Slight differences in colour on the front of the device are due to the use of different materials
such as glass, plastic and metal.
2.
The enamel is applied at very high temperatures. This can lead to slight colour variations. This
is normal and does not affect performance. The edges of thin sheets cannot be completely
enamelled. As a result, these edges can be rough. The corrosion protection is not impaired by
this.
3.
Always keep the appliance clean and remove dirt immediately to prevent the formation of
stubborn dirt deposits.
Tips
1.
Clean the cooking chamber after each use. This prevents dirt from caking on.
2.
Always remove any lime deposits, grease, starch and albumin (e.g. protein) immediately.
3.
Remove spots from sugary foods as soon as possible while the spot is still warm.
4.
For roasting, use suitable oven utensils, e.g. a roaster.
PYROLYTIC SELF-CLEANING
Your unit has an operating mode for "pyrolytic self-cleaning". This mode allows you to clean the
cooking chamber effortlessly.
The cooking chamber is heated to a very high temperature. Residues from roasting, grilling and
baking are burned. For your safety, we only offer one cleaning setting in this mode. The temperature
and operating time cannot be set in this mode.
Notes
The cooking chamber locks the door automatically for your safety. It can only be opened when the
temperature has fallen to a relatively safe level. The interior lighting remains switched off during the
cleaning process.
Warm soapy water:
Clean with a tea towel or brush.
Do not remove the lubricant when they are pulled out. It is best to clean
them when they are pushed in.
Do not clean them in a dishwasher.
18