Cleaning / Maintenance - Lacor 69138 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
11.- The ceramic cooktop will heat up slowly. The proper temperature for slow cooking is
60ºC~100ºC and 500W~800W.
12.- To block the screen just press the block button (key), and to unblock it re-press the block
button for 3 seconds.
13.- The cooktop will turn off automatically if there is no operation in a 2 hour period.
14.- When the cooktop is operating, keep in mind that parts of it heat-up, so be careful.
15.- If you want to cancel the timer function just press the ON/OFF button.
12.- Once you have finished using the appliance, press the "ON/OFF" button to turn off the
plaque. The ventilator will continue to function for a few seconds to prevent
heat bags inside the plaque.

CLEANING / MAINTENANCE

CLEANING:
1.- Always turn off and unplug the appliance before cleaning it. Wait until it is at room
temperature.
2.- Never use any chemical or abrasive products. Do not use a brush or any other type of
utensils which could damage the different parts and surface of the slicer.
3.- Use a damp cloth with detergent to clean the machine and then dry it. Make sure to clean
the machine completely every day.
ATTENTION:
4.-
Do not put the machine directly into any container with water in it.
This machine is not waterproof.
MAINTENANCE:
The induction plaque does not require special maintenance, but the following precautions should
be taken:
a- Do not leave the grinder running unsupervised; the engine overheating may reduce its
operating lifespan and/or generate irreparable damage.
b- Only use original spare parts; the use of parts supplied by other manufacturers may
permanently damage the machine.
c- If you do not use the grinder for long periods of time, we recommend applying a thin
layer of oil over the complete surface, even on the stainless steel tray.
d.- Do not obstruct the ventilator's air outflow located at the back. Excessive heating may
cause irreversible damage to the plaque.
e - Avoid banging on the surface of the plaque, for the glass may crack, especially when it
is hot.
31

Publicidad

Tabla de contenido
loading

Tabla de contenido