Cleaning / Maintenance; Cleaning & Maintenance - Lacor 69045 Manual Del Usuario

CLEANING / MAINTENANCE

CLEANING:
1.- Always turn off and unplug the machine before cleaning, and make sure that the
temperature setting is in the initial position.
2.- Never use any chemical or abrasive products. Do not use a brush or any other type of
utensils which could damage the different parts and surface of the slicer.
3.- Use a damp cloth with detergent to clean the machine and then dry it. Make sure to clean
the machine completely every day.
ATTENTION:
4.-
MAINTENANCE:
The induction plaque does not require special maintenance, but the following precautions should
be taken:
a- Do not leave the grinder running unsupervised; the engine overheating may reduce its
operating lifespan and/or generate irreparable damage.
b- Only use original spare parts; the use of parts supplied by other manufacturers may
permanently damage the machine.
c- If you do not use the grinder for long periods of time, we recommend applying a thin
layer of oil over the complete surface, even on the stainless steel tray.
30
Do not put the machine directly into any container with water in it.
This machine is not waterproof.