Overview; Design And Function; Choosing The Correct Pneumatic Hammer For A Task; Main Parts - Chicago Pneumatic CP 0012 Instrucciones Originales

CP 0012

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

These instructions are valid for the CP 0012. The CP
0012 is a machine with a D-handle, designed for
light demolition and plant work. The machine can
be used both horizontally and vertically. No other
use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic hammer for a
task
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
> If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
> If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
9800 0548 90b | Original instructions
Safety and operating instructions

Main parts

A
B
C
D
E
F
G
CP 0012
A. Trigger (start/stop device)
B. Handle
Air inlet
C.
Muffler
D.
Cylinder
E.
F. Piston
G. Tool retainer

Labels

The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
11