i.safe MOBILE IS530.M1 MINING +GD Manual De Inicio Rápido página 5

Do not expose the device to aggressive acids or bases.
Do not use the device in places where its use is prohibited.
Turn off the device in clinics or other medical facilities.
Always keep a safety distance of at least 15 cm between the device and a pacemaker or
hearing aid. The device can affect the functioning of medical devices such as pacemakers and
hearing aids.
When using the device while driving a motor vehicle, be sure to comply with applicable
national laws.
WHEN USING EARPHONES OR HEADSETS
First set the volume control on the device to 50 % of the maximum volume.
Gradually adjust the volume.
DEVICE OVERVIEW/FUNCTIONS
1
STATUS LED: Display for notifications and charging status.
2
SOS KEY: A long press of the SOS key sends an emergency call to a pre-saved emer-
gency number (only in connection with a Lone Worker Protection app).
3
LOUDSPEAKER
4
POWER KEY: A long press switches the device on/off. A short press switches the stand-
by mode on/off.
5
FRONT CAMERA
6
ISM INTERFACE: Connection for approved accessories. Also see section "Connecting
approved accessories".
7
MAGNETIC CHARGER PORT: Connection for the i.safe PROTECTOR 3.0 Magnetic
Charger Cable. Also see section "Charging".
8
SIDE KEY RIGHT: Optional function, e.g. camera (function can be assigned via apps
used).
9
CURRENT APPLICATION: Shows all open applications.
10
HOME KEY: Switch to the main screen.
11
BACK KEY: Go to the previous screen.
12
USB INTERFACE: Connection for the i.safe PROTECTOR 2.0 Type C USB Cable or for
connection to other devices. Also see sections "Charging" and "Connecting approved
accessories".
13
MICROPHONE
14
LOUDNESS CONTROL: Volume up/Volume down.
15
SIDE KEY LEFT: Optional function (can be assigned via apps used).
16
SENSORS: Proximity sensor, light sensor.
17
LED FLASH
18
NOISE CANCELLING: Noise cancelling microphone.
19
LOUDSPEAKER: Speaker for hands-free function.
EN 5