BDS Maschinen MAB 500 Instrucciones De Manejo página 25

www.bds-maschinen.de www.bds-maschinen.de www.bds-maschinen.de
24
The lubricating device must not be used in the case of overhead work.
In such a case, please use BDS high performance lubrication spray
ZHS 400.
Prior to drilling, spray the grease into the inside of the drill.
Spraying must be repeated in the case of greater drilling depths.
Switch off the motor
Press on 0 of the Motor switch and wait
until the motor has completely stopped.
Release the magnet
Set the Magnet switch to position 0.
info@bds-maschinen.de info@bds-maschinen.de info@bds-maschinen.de