Graco MyRide Guia Del Usuario

www.gracobaby.com
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
4
Remove chest clip.
DO NOT DISCARD the
chest clip.
7
Slide NEW buckle onto
harness straps. MAKE
sure not to twist straps.
10
Insert harness straps
behind harness cover
plate.
MyRide ® Buckle Replacement Guide
1
To loosen straps, lift lever
and pull harness straps.
5
8
Re-attach chest clip.
MAKE sure not to
twist straps.
11
Re-insert straps back onto splitter plate.
See carseat owner's manual for inserting the
splitter plate into the correct set of loops for
Remove harness
2
strap loops from
splitter plate.
Unbuckle harness by
tilting top of buckle
down, press top of red
button, and pull
tongues out of buckle.
9
See carseat owner's manual for inserting
the straps into the correct set of harness
your child.
©2014 Graco PD245610C 3/14
3
Pull harness straps
through seat back
and seat pad.
6
Remove and discard
tongues.
Re-insert straps through slots
in seat pad and seat back.
slots for your child.
Turn page over to
finish the rest of
the assembly
Steps 12 to 20
for the buckle
replacement.