ASROCK Fatality Z97 Killer Serie Manual Del Usuario página 30

Power LED Header
(3-pin PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 14)
(SATA3_1:
see p.1, No. 9)
(SATA3_2:
see p.1, No. 10)
(SATA3_3:
see p.1, No. 13)
(SATAE_4:
see p.1, No. 11)
(SATAE_5:
see p.1, No. 11)
Serial ATA Express
Connector
(SATAE:
see p.1, No. 11)
USB 2.0 Headers
(9-pin USB4_5)
(see p.1, No. 15)
(9-pin USB6_7)
(see p.1, No. 16)
26
All manuals and user guides at all-guides.com
1
PLED-
PLED+
PLED+
SATA3_0 SATA3_1 SATA3_2
SATA3_3 SATAE_5 SATAE_4
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Please connect the chassis
power LED to this header
to indicate the system's
power status.
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
The SATAE_4, SATAE_5
are shared with the SATA
Express connector.
Please connect either
SATA or PCIe storage
devices to this connector.
The SATA Express
connector is shared with
the SATAE_4, SATAE_5
and the M.2_SSD (NGFF)
Socket 3.
*The SATA Express
interface is a combination
of SATAE, SATAE_4, and
SATAE_5.
Besides four USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.