Berner BHFL75 Instrucciones De Empleo página 23

defective to be distinguished from a empty battery. The display shows the current
state.
After the initial tests, the battery can fully charged and a final evaluation are
subjected. Or alternatively perform the final evaluation without the full charge of the
battery.
TEST + CHARGE (12V)
The TEST + CHARGE function is a
combination of a battery charge and a
battery- loading test. Before charging and
after completion of the charge, the battery
is charged for several seconds with an
average power to assess the battery
condition.
If it is determined in the initial test, the
battery is weak, be driven up to two
5-minute charging check cycles around a
22