Use Of Accessories - Forch 6600 6287 Manual Del Usuario

Drilling machine – Set 12 V
ENG
a) On / Off switch
b) Motor housing
c) Spring retainer handle
d) Cable
e) Ventilation slots
■
Housing made of ABS
■
Input voltage:
■
Maximum power:
■
Idle speed:
■
Maximum speed:
■
Drill chuck:
■
Collet chuck:
Please read this manual carefully before using the product!

Use of accessories:

Tooth chuck:
■ Switch the machine off
■ Open the toothed chuck with the chuck key
■ Insert shank of the accessory deep enough into the chuck and then close the chuck
Quick-release chuck:
■ Switch the machine off
■ Press the locking button or hold the drill chuck holder
■ Open the drill chuck by turning it counter-clockwise
■ Insert shank of the accessory deep enough into the chuck (do not use pliers)
Steel collets:
■
Switch the machine off
■
Press the locking button or hold the drill chuck holder
■
Then screw the cap nut off the spindle by turning counter-clockwise
f) Work spindle
g) Quick-release chuck
h) Cap nut
i) Steel collets
0 – 18 V DC
40W
20.000
30.000
0.4 – 3.2 mm