Use Of Accessories - Forch 6600 6283 Manual De Instrucciones

Drilling machine 12 V
ENG
a) On / Off switch
b) Motor housing
c) Spring retainer handle
e) Ventilation slots
■
Housing made of ABS
■
Input voltage:
■
Maximum power:
■
Idle speed:
■
Maximum speed:
■
Drill chuck:
■
Collet chuck
Please read this manual carefully before using the product!

Use of accessories:

Tooth chuck:
■ Switch the machine off.
■ Open the toothed chuck with the chuck key.
■ Insert shank of the accessory deep enough into the chuck and then close the chuck.
Quick-release chuck:
■ Switch the machine off.
■ Press the locking button or hold the drill chuck holder.
■ Open the drill chuck by turning it counter-clockwise.
■ Insert shank of the accessory deep enough into the chuck (do not use pliers).
a
b
d
e
f) Work spindle
g) Quick-release chuck
d) Cable
0 – 18 V DC
40W
20.000 U/min
30.000 U/min
0.4 – 3.2 mm
g
f
c