Service Life; Spare Parts And Consumables; Important Notice - 3M Adflo Instrucciones De Uso

Ocultar thumbs Ver también para Adflo:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacement of the Nuisance Odor Pad
The nuisance odor pad may be replaced by pressing the expired nuisance odor pad out of the nuisance odor pad assembly from the backside, or side
with the gasket or multiple square holes. It is easiest to press the nuisance odor pad out on the vertical edges, nearest to the frame edge, and then
work the entire nuisance odor pad free from the assembly. Install a new nuisance odor pad by pressing it into the nuisance odor pad assembly. The
nuisance odor pad may only be used to help provide relief from concentrations of organic vapors not exceeding the OSHA permissible exposure limit
(PEL) or applicable government occupational exposure limits, whichever is lower. Replace when smell or taste occurs.

SERVICE LIFE

Nuisance Odor Pad Assembly
The useful service life of the 3M™ Adflo™ PAPR Nuisance Odor Pad Assembly will depend on the environmental conditions and concentration of the
contaminants and environmental conditions such as humidity and temperature.

Spare Parts and Consumables

35-0699-99X01
Nuisance Odor Pad Assembly, 1/case
35-0799-99X01
Nuisance Odor Pad, 1/case
35-0799-99X10
Nuisance Odor Pad, 10/case

IMPORTANT NOTICE

WARRANTY: In the event any 3M PSD product is found to be defective in material, workmanship, or not in conformation with any express warranty
for a specific purpose, 3M's only obligation and your exclusive remedy shall be, at 3M's option, to repair, replace or refund the purchase price of such
parts or products upon timely notification thereof and substantiation that the product has been stored, maintained and used in accordance with 3M's
written instructions.
EXCLUSIONS TO WARRANTY: THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OR CONDITION OF QUALITY, EXCEPT OF TITLE AND
AGAINST PATENT INFRINGEMENT.
LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental,
special or consequential, arising out of sale, use or misuse of 3M PSD products, or the user's inability to use such products. THE REMEDIES SET
FORTH HEREIN ARE EXCLUSIVE.
NOTE: Because the motor/blower and battery charger of this 3M™ Adflo™ PAPR Assembly may produce radio frequency energy, 3M is providing
the following information pursuant to FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
FOR MORE INFORMATION
In United States, contact:
Website: www.3m.com/workersafety
Technical Assistance: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or 1-651-737-6501
FOR MORE INFORMATION
In Canada, contact:
Internet: www.3M.ca/Safety
Technical Assistance: 1-800-267-4414
Customer Care Center: 1-800-364-3577
3
(English)
98-0060-0226-9_2
34-8721-6196-2

Publicidad

Tabla de contenido
loading

Tabla de contenido