Conceptronic Powerplug Adapter CPNP200 Guía De Instalación Rápida página 30

ENGLISH
3. Connecting the Powerplug Starter-Set
The Powerplug Adapter can be used to extend your Powerplug network with an extra
connection. The electrical circuit in your home will work as a network and transfers
your data to and from your connected computers.
You can connect the Powerplug Adapter as described in the following example, or
create your own setup.
Note: The use of a power-extension cord or power strip is not recommended. This
will decrease the link-quality of the Powerplug network. Connect the
Powerplug Adapters directly to your wall outlet.
When the Powerplug Adapter is connected to the electrical circuit, the Link-LED on the
device will burn. The Link-LED indicates that the Powerplug Adapters are connected
with each-other.
The Powerplug network works like a "Bridge". If your router is providing IP Addresses to
your network devices through DHCP, the connected PC will receive an IP Address from
the router through the Powerplug "Bridge" connection.
Connecting the Powerplug requires only 3 simple steps:
A. Connect the supplied network cable between the Powerplug and your PC.
B. Insert the Powerplug in a free wall-outlet
C. Power on your computer.
30