Conceptronic Powerplug Adapter CPNP200 Guía De Instalación Rápida página 45

ENGLISH
C. Select the "PC Adapter" and click the "Factory Reset" button.
Note: You can reset only 1 Powerplug Adapter at a time.
If you select a Powerplug Adapter listed in the section "Other Adapters", the
"Factory Reset" button is not shown. You can reset the selected adapter
through the Advanced Configuration described in Chapter 6.2.
The Powerplug Configurator will ask you for the Factory Reset Password. Enter the
Factory Reset Password ("betera") and click "OK". The Powerplug Adapter will be set
back to the factory default settings.
You will be notified when the factory default settings are applied. Click "OK" to close
the notification window.
C
45
C