Conceptronic Powerplug Adapter CPNP200 Guía De Instalación Rápida página 50

ENGLISH
Option
Configuration Password
Confirm Password
Update Password
Note: The Powerplug Adapters are configured with a password by default. This password is
programmed in the Powerplug Configurator for easy configuration.
If you change the password, the Powerplug Configurator will ask you for the password
when you try to configure it.
The default configured password is: "paterna" (with small characters).
Encryption Key
Confirm Encryption Key
Update Key
Network ID
Update Net Id
Note: When you configure all Powerplug Adapters separately, make sure that the "Net ID"
(Network name) and the "Encryption Key" are the same for all adapters.
If one of these settings is different than the other configured Powerplug Adapter(s),
the Powerplug network will not function!
Alias
Update Alias
Refresh
Exit
Description
Enter a password for the Powerplug Configuration.
Re-enter the Password you assigned above.
Apply the Password Configuration.
To secure your network, enter an Encryption Key here.
Re-enter the Encryption Key you assigned above.
Apply the Encryption Key Configuration.
Assign a name to your Powerplug Network.
Apply the assigned Network ID
Assign a name to the selected Powerplug. With assigned
names, you can easily identify each Powerplug Adapter in
the configuration window.
Apply the assigned Alias.
Refresh the current application window
Exit the Advanced Configuration
50