Viewing Test Results In Memory; Setting Reminder Alarms (Optional); Purpose - Freestyle Freedom Lite Manual Del Usuario

Viewing Test Results in Memory

Meter memory stores the last 400 test results with time and date. Press
results. The most recent result appears first.
on the display indicates that you are viewing stored test results.
shows the average value of glucose readings from the last 7-, 14-, or 30-days.
on the display indicates that the test result occurred when it was too hot or too
cold to use the meter and may not be accurate. This result is included in 7-, 14-,
and 30-day averages.
a test result of under 20 mg/dL is included in memory as LO.
a test result of over 500 mg/dL is included in memory as HI.
indicates a control solution test result.
29
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
ART22812-003_rev-A.indd 29-30
All manuals and user guides at all-guides.com

Setting Reminder Alarms (optional)

c
to scroll through the

Purpose

The purpose of this section is to set up to four reminder alarms to prompt you to test throughout
the day.
1.
With the meter off, press and hold m
and 0 is flashing.
2.
c . Reminder alarm 1 flashes.
Press
Reminder Alarm
Note: You are setting time for Reminder Alarm not clock time.
3.
Set hour
•
m
Press to set hour
•
c
Press to display correct hour
Hour
•
m
Press to save
4.
Set minutes
•
c
Press to display correct minutes
•
m
Press to save
Minutes
for 3 seconds until
appears
30
11/10/16 11:02 AM