Playing Karaoke - Sharp CD-BK133W Manual De Manejo

Playing karaoke

CD-BK133W
E-19 ENGLISH
1
Set the MIC LEVEL control to MIN to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
! Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
! Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")
diameter plug.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the CD or TAPE (1 2) buttons to select the audio source
and play it.
If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages
20 - 21 for details.)
5
Adjust the volume of the audio source using the VOLUME buttons.
6
Turn the MIC LEVEL control towards MAX to increase the micro-
phone volume and towards MIN to decrease it.
Notes:
! When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone vol-
ume.
! If an extremely sensitive microphone is used, howling may be generated.
! Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
! Reduce the microphone volume.
! Change the direction of the microphone.
! Reduce the volume of the main unit.
! Move the microphone away from the speakers.
Caution:
! When not using the microphone, remove it from the MIC socket.
! When connecting or disconnecting the microphone, set the MIC LEVEL control to
MIN.
01/7/3 CD-BK133W(X)E2.fm