Kicker DXA Serie Manual Del Propietário página 3

core conductor
source unit
high-level speaker
outputs
+
–
Install a fuse within 18" (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
Model External Fuse
(sold separately)
DXA250.1 1 x 40 Ampere
DXA500.1 1 x 80 Ampere
DXA1000.1 1 x 150 Ampere
DXA1500.1 1 x 150 Ampere
MONO OPERATION
minimum impedance of 2 ohms
≤24"
(60cm)
2014 DXA Mono Amps Rev B.indd 3 2014 DXA Mono Amps Rev B.indd 3
All manuals and user guides at all-guides.com
to amplifi er
shield
Power/Ground Wire
8 Gauge
4 Gauge
4 Gauge
4 Gauge
woofer
external fuse
remote turn-on
(see page 5)
KICKER KISL (optional)
OR
from source unit high-
level speaker outputs
KICKER Wiring Kit
PK8, ZCK84
PK4, CK44, ZCK44
PKD1, PWB050
PKD1, PWB050
≤18"
(45cm)
12V
battery
bare-metal
chassis ground
to amplifi er
3
8/2/2013 3:12:19 PM 8/2/2013 3:12:19 PM