Philips Norelco 8000 Serie Manual De Instrucciones página 20

20
English
Cleaning the shaver in the SmartClean system
2
1
SmartClean has two phases: a cleaning phase
and a drying phase.
Preparing the SmartClean system for use
Caution: Do not tilt the SmartClean system to
prevent leakage.
Note: Hold the SmartClean system while you
prepare it for use.
1 Put the small plug in the back of the
SmartClean system.
2 Put the power plug in the wall outlet.
3 While holding the SmartClean system with
one hand, press the button on the side of
the SmartClean system and lift the top part
of the SmartClean system.
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the
SmartClean system.