Philips Norelco 8000 Serie Manual De Instrucciones página 21

1
3
2
6 While holding the SmartClean system with
one hand, gently push the top part of the
SmartClean system back down ('click').
Using the SmartClean system
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.
1 Press to open the SmartClean system cap,
to be able to place the shaver in the holder
('click').
2 Hold the shaver upside down above the
holder. Make sure the front of the shaver
points towards the SmartClean system
holder.
3 Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the
top cap to connect the shaver ('click') (3).
The battery symbol starts to flash, which
indicates that the shaver is charging.
21
English