Philips Norelco 8000 Serie Manual De Instrucciones página 22

22
English
4 Press the on/off button on the SmartClean
system to start the cleaning program.
During the rinsing phase, the rinsing symbol
flashes. When the rinsing phase is done (after
approx. 10 minutes), the rinsing symbol lights
up continuously.
After the rinsing phase, the drying phase starts
automatically. During this phase, the drying
symbol flashes. When the drying phase is done
(after approx. 4 hours), the drying symbol lights
up continuously.
When the cleaning program is done, the ready
symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, the SmartClean system
switches off automatically.
The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning
program, the program stops. In this case, the
cleaning or drying symbol goes out.
Note: If you disconnect the SmartClean system
from its power supply, the cleaning program
stops.