Philips Norelco 8000 Serie Manual De Instrucciones página 27

6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
10 Reattach the retaining rings.
- Blue retaining ring: Place the retaining ring
1
on the shaving head and turn it clockwise to
reattach the retaining ring.
2
Align the arrows on the retaining ring with
the projections in the shaving head holder.
Turn the ring clockwise until it clicks to
indicate that the ring is fixed.
- Orange retaining ring: Place the retaining
1
ring on the shaving head and turn it
clockwise to reattach the retaining ring.
Repeat this process for the other retaining
rings.
2
27
English