Changing The Filter - Filtrete FAP-T02 Manual De Instrucciones

CHANGING THE FILTER

This air purifier comes equipped with three filters: One main
electrostatic Filtrete™ filter and two reusable pre-filter screens.
These filters should be changed at the necessary times, as
highlighted by the filter change indicators, to ensure that the air
Follow the instructions below to change the filters.
Prefilter Screens
screens out of the back of the air purifier.
3. Insert the pre-filters back into their
designated slots – remember, the two
respective side.
10
2. Vacuum the pre-filter screens, and/or use
water to rinse the pre-filters clean. Ensure
the pre-filter is dry before reinstalling it in
the device.
4. Turn on the air purifier, then tap the
RESET button once to reset the pre-filter
change indicator.
2. Vacuum the pre-filter scre
water to rinse the pre-filters
the pre-filter is dry before re
the device.