Air Purifier Controls - Filtrete FAP-T02 Manual De Instrucciones

AIR PURIFIER CONTROLS
operation. When you press the printed icon for each function, the controls will
sense your touch and the air purifier will respond to your input.
Plug the air purifier into a 120V AC electric outlet, then press the POWER icon to
turn ON the device. To turn the air purifier OFF, simply press the power button
again.
Adjusting Fan Speed
This air purifier has 4 fan speeds – a higher fan speed will provide a higher level of
cleaning. Press the FAN icon to cycle through the available fan speeds (1-4). Press
the icon again to return to fan speed 1.
Timer
The timer function will turn the air purifier OFF after a set amount of time. For
To start a timer, press the TIMER icon until you reach the desired time. Press the
TIMER icon again to cycle through the timer settings, or turn the timer OFF (timer
Lighting Function
the timer of the air purifier.
To temporarily turn OFF the display lights, simply press the LIGHT icon on the air
purifier. To turn the display lights back on, press the LIGHT icon again.
Filter Change Indicator
This air purifier is equipped with an electronic filter change indicator. This indicator
monitors the use of the filter to signal when the filter needs to be changed. The
indicator light will turn orange when the filter has 10% life remaining. The light will
then turn red when the filter life is 0% and the filter should be changed. The table
below provides an estimated length of filter life based on the number of hours of
daily use (in a 7-day week).
Daily Use
Filter Life
Prefilter Cleaning
Once you have changed the filter in the air purifier, reset the filter change indicator – to do so,
hold the RESET icon for 3 seconds if changing the main filter, or tap the icon once to reset the
indicator for the pre-filter.
6 hours
12 months
4 months
12 hours
6 months
2 months
24 hours
3 months
1 month
9