Operation - Klarstein THERMAXX NOIR Manual De Instrucciones

Inserting batteries into the remote control

OPERATION

Press the Standby button (f) to turn on the unit. The product is now in standby mode.
You can now select a function from the control panel or remote control. The unit beeps
and the power indicator (plug symbol) lights up. A beep sounds each time the button is
pressed.
Press the standby key (f) to exit the standby mode and select one of the modes with .
Heating starts with low power operation.
Setting the heat output
Press the Power/Mode button (c) repeatedly to select one of the following heat outputs:
Low ( ), Medium (
medium power and high power, the heater will keep the power constant.
Note: The higher the power, the faster the desired temperature will be reached but
the power consumption will increase. We recommend a lower power level if the
heater is to be used for a longer period of time.
), High ( ) and Eco mode (ECO). For low power,
EN
15