GYS POWERDUCTION 110LG Manual Del Usuario página 23

Translation of the original instructions
GENERAL INSTRUCTIONS
This manual contains safety and operating instructions, to be fol-
lowed for your safety. Please read it carefully before using the
device for the first time and keep it in a safe place for future refe-
rence. Read and understand the following safety recommenda-
tions before using or servicing the unit. Any change or servicing
that is not specified in the instruction manual must not be under-
taken. The manufacturer is not liable for any injury or damage
caused due to non-compliance with the instructions featured in this
manual . If there is any issue or uncertainty, please consult a qua-
lified individual to operate the equipment correctly. This machine
should only be used for operations comprised within the limits in-
dicated on the machine and in the instruction manual. The opera-
tor must observe the safety precautions. In case of inedaquate or
unsafe use, the manufacturer cannot be held liable for damage or
injury. Any other uses not specified in this manual is forbidden,
and possibly dangerous. The product is semi automatic and re-
quires the presence of an operator.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of ex-
perience or knowledge, if they are properly monitored or if instruc-
tions for using the equipment safely have been read and risks made
aware of. Children must not play with the product. Cleaning and
maintenance should not be performed by an unsupervised child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep airbags, gas cannisters or other pressurised gas contai-
ners away from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and
may cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
• Check that jewellery (such as wedding rings) or other metal
pieces do not get close to the induction heating machine or the
inductor when switched on.
• Remove any jewellery or any metal object from yourself before
using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a medi-
cal doctor as soon as possible.
POWERDUCTION 110LG / 160LG EN
23