UNFOLDING GUIDE
Figure A
To unfold the Sliding Rail
(No. 2), first remove Knob
(No. 31) and Pull Pin (No.
27) (as Figure A showed).
Slightly lay down the Sliding
Rail (No. 2), then screw
Knob (No. 31) to tighten the
Sliding Rail (No. 2) and
insert the Pull Pin (No. 27)
(as Figure B showed).
NOTE:
When
unfolding,
please keep one hand to hold
the Sliding Rail (No. 2) to
avoid the injury.
Figure B
15