Publicidad
Step 11
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D30) and a DRAWER LEFT (35AD) to the LEFT DRAWER
å
SIDE (D31). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The glides are not intended to rotate.
å
Fasten a PULL (101K) to the DRAWER FRONT (H). Use two SILVER 5/8" MACHINE SCREWS (15S).
å
Repeat this step for the other DRAWERS.
å
2
101K
SILVER 5/8" MACHINE SCREW
(8 used for the PULLS)
www.sauder.com/services
Glide end
1
D31
15S
10A
H
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
416859
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D30
2
3S
Glide end
1
Page 15
Publicidad
