Publicidad
Idiomas disponibles
Idiomas disponibles
Reference codes: 1952 003 249, 1952 003 215
Tools required: Ratchet wrench
To renew the thread for the new glow plug which will be mounted,
use the included male + extension (fig. 8):
• M10x1
• M10x1,25
Reference codes: 1952 003 218, 1952 003 219,
1952 003 217, 1952 003 233
Tools required: Ratchet wrench
Once renewed the thread for the new spark plug,
clean the seat with compressed air to remove dirt
and / or material debris.
Once the thread for the new spark plug is ready, tighten the
threaded insert ¼ -28 UNF (M10) or 12-28 UNF (M9, M8) for
extraction to the pin with threaded hole M8 (with the impact mass
mounted) (fig. 9).
Reference codes: 1952 003 262, 1952 003 214, 1952 003
907, 1952 003 216
Tools required: Combination wrench CH-8; Hexagonal wrench
CH-6
If necessary (engine size) use the extension for
extraction pin code 1952 003 221.
Screw the threaded insert for extraction to the glow plug and
proceed with the extraction phase acting on the impact mass (fig.
A
9 ref.
).
Continue inserting the new glow plug (fig. 10).
The kit includes the magnet; plastic manual tool with magnet
(fig. 11).
Length: 165 mm
28
• M9x1
• M8x1
10
11
Publicidad
