EngLIsh
AXIAL BLOWER
DCMBL562
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Air Speed
Air Volume
Sound power level
K (uncertainty for the given sound level)
Sound pressure level
K (uncertainty for the given sound level)
Guaranteed sound power level
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN 50636-2-100:2014:
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN 50636-2-100 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING:
or noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
22
WALT one of the
e
DCMBL562
V
18
DC
1
Li-Ion
Km/h
200
CFM
450
LwAm
95 dBA
KwA
1.7 dBA
LpA
88 dBA
KpA
2.5 dBA
LwAd
97 dBA
kg
3.1 kg
m/s
2
<2.5
m/s
2
1.5
The declared vibration and/
EC-Declaration of Conformity
Machinery Directive
Axial Blower
DCMBL562
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN 60335-1:2012+A11:2014+A13:2017 and EN
50636-2-100:2014. 2000/14/EC , Annex V DEKRA Certification
B.V., Meander 1051 / P.O. Box 5185 6825 MJ ARNHEM / 6802 ED
ARNHEM Netherlands
Notified Body ID No.: 0344
LPA (measured sound pressure level) 88 dB(A) K=2.5 dB(A)
LWA (guaranteed sound power) 97 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
30.10.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
situation which, if not avoided, will result in death or
serious injury.
WARNING:
situation which, if not avoided, could result in death or
serious injury.
CAUTION:
situation which, if not avoided, may result in minor or
moderate injury.
WALT at
e
WALT.
e
Indicates an imminently hazardous
Indicates a potentially hazardous
Indicates a potentially hazardous