Bosch UniversalSaw 18V-100 Manual Original página 17

(11) Saw blade
(12) Viewing window for Cut Control
(13) Guide roller
(14) Shock protection guard
(15) Saw blade receptacle
(16) Worklight
(17) Handle (insulated gripping surface)
(18) Saw blade storage compartment
(19) Glide shoe
(20) Anti-splinter guard
(21) Guide for parallel guide
a)
(22) Dust extraction adapter
a)
(23) Dust extraction hose
(24) Scale for mitre/bevel angles
(25) Base plate screw
(26) 0° cut mark Cut Control
(27) 45° cut mark Cut Control
(28) Locking screw for parallel guide
(29) Parallel guide with circle cutter
a)
(30) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Jigsaw
Article number
Stroke rate control
Pendulum action
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to
A)
EPTA‑Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation and during
storage
Recommended rechargeable
batteries
Bosch Power Tools
Jigsaw
Recommended battery char-
gers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA re-
Noise/Vibration Information
a)
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power level
94 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade T 144 D:
a
h,B
cutting sheet metal with saw blade T 118 A:
a)
a
h,M
a)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
UniversalSaw 18V-100
plication tools or is poorly maintained, the vibration level
3 603 K11 1..
and noise emission value may differ. This may significantly
● increase the vibration and noise emissions over the total
working period.
●
To estimate vibration and noise emissions accurately, the
V= 18
times when the tool is switched off or when it is running but
−1
min 0–2600
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
mm 20
over the total working period.
Implement additional safety measures to protect the oper-
mm 100
ator from the effects of vibration, such as servicing the
mm 18
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
mm 8
° 45
Assembly
2.0 (1.5 Ah) to
kg
2.3 (6.0 Ah)
u
°C 0 to +35
°C –20 to +50
Battery Charging
PBA 18V...W-.
u
C)
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
2 2
= 10 m/s , K = 1.5 m/s ,
2 2
= 9 m/s , K = 1.5 m/s .
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 5Y0 | (27.05.2021)
English | 17
UniversalSaw 18V-100
AL 18...